• Address: 2990 Technology Dr,
    Rochester Hills, MI 48309
    AS9100D & ISO 9001:2015 | CAGE:06197

  • Call Us: (877) 740-1077
    sales@askmonroe.com
    Live Chat

Loose Joint Hinges, variably referred to as slip, separable or take-apart hinges, have always been catalogued as right or left hand hinges. Because applications may vary, this has caused errors in in specification as to which is right or left hand. To simplify the selection of all loose joint hinges, we have identified each hinge by type and illustrated them in some detail. These hinges may be modified by hole piercing, swaging, forms and finishes. Refer to Special Hinge Guide. Other gauges, widths, lengths, and pin materials can be made to order.

This section contains the sizes and numbers of loose joint hinges which are considered standard and are usually carried in stock. These are surface type blank hinges without holes and less finish. They have spun or loose pins of similar material.

Other gauges, widths, lengths, and pin materials can be made to order. Prices based on quantity of order are available upon request. NO MINIMUM quantity required, any order acceptable.

1 - 20 of 20 | Results Per Page | View | Unit of Measure
1 
Clear Filter

Length (in)

Gauge (in)

Open Width (in)

Pin Diameter (in)

Item #

Length

Gauge

Open Width

Pin Diameter

Material/Type

Hinge Leaf Material

Hinge Pin Material

LJH1065-S N/A 2.00 in N/A 0.048 in N/A 1.25 in N/A 0.125 in N/A Flag Type N/A Cold Rolled Steel N/A Steel
LJH1069-S N/A 2.00 in N/A 0.048 in N/A 1.50 in N/A 0.125 in N/A Flag Type N/A Cold Rolled Steel N/A Steel
LJH1077-S N/A 3.00 in N/A 0.048 in N/A 2.00 in N/A 0.125 in N/A Flag Type N/A Cold Rolled Steel N/A Steel
LJH1073-S N/A 2.50 in N/A 0.048 in N/A 1.50 in N/A 0.125 in N/A Flag Type N/A Cold Rolled Steel N/A Steel
LJH1041-S N/A 1.50 in N/A 0.060 in N/A 1.00 in N/A 0.125 in N/A Flag Type N/A Cold Rolled Steel N/A Steel
LJH1045-S N/A 2.00 in N/A 0.060 in N/A 1.25 in N/A 0.125 in N/A Flag Type N/A Cold Rolled Steel N/A Steel
LJH1049-S N/A 2.00 in N/A 0.060 in N/A 1.50 in N/A 0.125 in N/A Flag Type N/A Cold Rolled Steel N/A Steel
LJH1053-S N/A 2.00 in N/A 0.060 in N/A 2.00 in N/A 0.125 in N/A Flag Type N/A Cold Rolled Steel N/A Steel
LJH1057-S N/A 2.50 in N/A 0.060 in N/A 2.00 in N/A 0.125 in N/A Flag Type N/A Cold Rolled Steel N/A Steel
LJH1061-S N/A 3.00 in N/A 0.060 in N/A 2.00 in N/A 0.125 in N/A Flag Type N/A Cold Rolled Steel N/A Steel
LJH1025-S N/A 2.00 in N/A 0.075 in N/A 1.50 in N/A 0.125 in N/A Flag Type N/A Cold Rolled Steel N/A Steel
LJH1029-S N/A 2.50 in N/A 0.075 in N/A 2.00 in N/A 0.125 in N/A Flag Type N/A Cold Rolled Steel N/A Steel
LJH1033-S N/A 3.00 in N/A 0.075 in N/A 2.00 in N/A 0.187 in N/A Flag Type N/A Cold Rolled Steel N/A Steel
LJH1037-S N/A 4.00 in N/A 0.075 in N/A 3.00 in N/A 0.187 in N/A Flag Type N/A Cold Rolled Steel N/A Steel
LJH1008-S N/A 2.50 in N/A 0.090 in N/A 2.00 in N/A 0.187 in N/A Flag Type N/A Cold Rolled Steel N/A Steel
LJH1012-S N/A 3.00 in N/A 0.090 in N/A 2.00 in N/A 0.187 in N/A Flag Type N/A Cold Rolled Steel N/A Steel
LJH1016-S N/A 3.00 in N/A 0.090 in N/A 3.00 in N/A 0.250 in N/A Flag Type N/A Cold Rolled Steel N/A Steel
LJH1021-S N/A 4.00 in N/A 0.090 in N/A 3.00 in N/A 0.250 in N/A Flag Type N/A Cold Rolled Steel N/A Steel
LJH1000-S N/A 4.00 in N/A 0.120 in N/A 3.00 in N/A 0.250 in N/A Flag Type N/A Cold Rolled Steel N/A Steel
LJH1004-S N/A 4.00 in N/A 0.120 in N/A 4.00 in N/A 0.250 in N/A Flag Type N/A Cold Rolled Steel N/A Steel
1 - 20 of 20 | Results Per Page | View | Unit of Measure
1 

Are you looking for a quote?

Values Provider

Engineering Support

Over 150 years of combined knowledge for our customers

Material Solutions

A full complement of aluminum, steel, stainless steel and more.

Customer Service

We are well known for our superior Customer Service

Quality Assurance

We are AS9100D & ISO 9001:2015 certified and have a customer base in many diverse industries