Call us: (877)740-2671


  • Identification impression are available at an additional cost.
  • Special Finishes Available Upon Request.
  • Specific Hole Patterns & Special Lengths Available Upon Request.
  • Mil Specs (pdf) - MS20001L
  • Mil Specs (pdf) - MS20001M
1 - 15 of 15 | Results Per Page | View | Unit of Measure
1 

Item #

Length

Thickness

Open Width

Pin Diameter

Knuckle

CAD

MS20001002 N/A 72.00 in N/A 0.056 in N/A 1.06 in N/A 0.090 in N/A 0.50 in N/A
MS20001003 N/A 72.00 in N/A 0.056 in N/A 1.25 in N/A 0.090 in N/A 0.50 in N/A
MS20001006 N/A 72.00 in N/A 0.056 in N/A 2.00 in N/A 0.090 in N/A 0.50 in N/A
MS20001010 N/A 72.00 in N/A 0.056 in N/A 2.75 in N/A 0.090 in N/A 0.50 in N/A
MS20001A04 N/A 72.00 in N/A 0.056 in N/A 1.50 in N/A 0.090 in N/A 0.50 in N/A
MS20001A06 N/A 72.00 in N/A 0.056 in N/A 2.00 in N/A 0.090 in N/A 0.50 in N/A
MS20001A09 N/A 72.00 in N/A 0.056 in N/A 2.50 in N/A 0.090 in N/A 0.50 in N/A
MS20001P03 N/A 72.00 in N/A 0.056 in N/A 1.25 in N/A 0.090 in N/A 0.50 in N/A
MS20001P04 N/A 72.00 in N/A 0.056 in N/A 1.50 in N/A 0.090 in N/A 0.50 in N/A
MS20001P06 N/A 72.00 in N/A 0.056 in N/A 2.00 in N/A 0.090 in N/A 0.50 in N/A
MS20001P08 N/A 72.00 in N/A 0.076 in N/A 2.00 in N/A 0.180 in N/A 0.50 in N/A
MS20001012 N/A 72.00 in N/A 0.115 in N/A 3.38 in N/A 0.090 in N/A 0.50 in N/A
MS20001P12 N/A 72.00 in N/A 0.115 in N/A 3.38 in N/A 0.090 in N/A 0.50 in N/A
MS20001014 N/A 72.00 in N/A 0.163 in N/A 3.72 in N/A 0.130 in N/A 0.50 in N/A
MS20001016 N/A 72.00 in N/A 0.210 in N/A 3.94 in N/A 0.180 in N/A 0.50 in N/A
1 - 15 of 15 | Results Per Page | View | Unit of Measure
1