Call us: (877)740-2671


Loose Joint Hinges, variably referred to as slip, separable or take-apart hinges, have always been catalogued as right or left hand hinges. Because applications may vary, this has caused errors in in specification as to which is right or left hand. To simplify the selection of all loose joint hinges, we have identified each hinge by type and illustrated them in some detail. These hinges may be modified by hole piercing, swaging, forms and finishes. Refer to Special Hinge Guide. Other gauges, widths, lengths, and pin materials can be made to order.

This section contains the sizes and numbers of loose joint hinges which are considered standard and are usually carried in stock. These are surface type blank hinges without holes and less finish. They have spun or loose pins of similar material.

Other gauges, widths, lengths, and pin materials can be made to order. Prices based on quantity of order are available upon request. NO MINIMUM quantity required, any order acceptable.

1 - 25 of 27 | Results Per Page | View | Unit of Measure
1 2 
Clear Filter

Gauge (in)

Open Width (in)

Length (in)

Pin Diameter (in)

Item #

Gauge

Open Width

Length

Pin Diameter

Type

Material/Type

Hinge Leaf Material

Hinge Pin Material

LJH1162-S N/A 0.048 in N/A 1.00 in N/A 1.50 in N/A 0.125 in N/A B N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1166-S N/A 0.048 in N/A 1.25 in N/A 1.50 in N/A 0.125 in N/A B N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1170-S N/A 0.048 in N/A 1.50 in N/A 2.00 in N/A 0.125 in N/A B N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1174-S N/A 0.048 in N/A 1.50 in N/A 2.50 in N/A 0.125 in N/A B N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1138-S N/A 0.060 in N/A 1.25 in N/A 2.00 in N/A 0.125 in N/A B N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1142-S N/A 0.060 in N/A 1.50 in N/A 2.00 in N/A 0.125 in N/A B N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1146-S N/A 0.060 in N/A 1.50 in N/A 2.50 in N/A 0.125 in N/A B N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1151-S N/A 0.060 in N/A 2.00 in N/A 3.00 in N/A 0.125 in N/A B N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1152-S N/A 0.060 in N/A 2.00 in N/A 3.00 in N/A 0.187 in N/A B N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1158-S N/A 0.060 in N/A 3.00 in N/A 4.00 in N/A 0.125 in N/A B N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1122-S N/A 0.075 in N/A 1.50 in N/A 2.00 in N/A 0.187 in N/A B N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1126-S N/A 0.075 in N/A 2.00 in N/A 2.50 in N/A 0.187 in N/A B N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1130-S N/A 0.075 in N/A 2.00 in N/A 3.00 in N/A 0.187 in N/A B N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1133-S N/A 0.075 in N/A 3.00 in N/A 4.00 in N/A 0.187 in N/A B N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1098-S N/A 0.090 in N/A 1.50 in N/A 2.00 in N/A 0.187 in N/A B N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1102-S N/A 0.090 in N/A 1.50 in N/A 2.50 in N/A 0.187 in N/A B N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1106-S N/A 0.090 in N/A 2.00 in N/A 2.50 in N/A 0.187 in N/A B N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1110-S N/A 0.090 in N/A 2.00 in N/A 3.00 in N/A 0.250 in N/A B N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1114-S N/A 0.090 in N/A 3.00 in N/A 3.00 in N/A 0.250 in N/A B N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1118-S N/A 0.090 in N/A 4.00 in N/A 4.00 in N/A 0.250 in N/A B N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1082-S N/A 0.120 in N/A 3.00 in N/A 4.00 in N/A 0.250 in N/A B N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1086-S N/A 0.120 in N/A 4.00 in N/A 4.00 in N/A 0.250 in N/A B N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1090-S N/A 0.120 in N/A 5.00 in N/A 5.0 in N/A 0.250 in N/A B N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1094-S N/A 0.120 in N/A 6.00 in N/A 6.0 in N/A 0.250 in N/A B N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1178-S N/A 0.187 in N/A 3.00 in N/A 4.00 in N/A 0.375 in N/A B N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
1 - 25 of 27 | Results Per Page | View | Unit of Measure
1 2