Call us: (877)740-2671


Loose Joint Hinges, variably referred to as slip, separable or take-apart hinges, have always been catalogued as right or left hand hinges. Because applications may vary, this has caused errors in in specification as to which is right or left hand. To simplify the selection of all loose joint hinges, we have identified each hinge by type and illustrated them in some detail. These hinges may be modified by hole piercing, swaging, forms and finishes. Refer to Special Hinge Guide. Other gauges, widths, lengths, and pin materials can be made to order.

This section contains the sizes and numbers of loose joint hinges which are considered standard and are usually carried in stock. These are surface type blank hinges without holes and less finish. They have spun or loose pins of similar material.

Other gauges, widths, lengths, and pin materials can be made to order. Prices based on quantity of order are available upon request. NO MINIMUM quantity required, any order acceptable.

1 - 20 of 20 | Results Per Page | View | Unit of Measure
1 
Clear Filter

Gauge (in)

Open Width (in)

Length (in)

Pin Diameter (in)

Item #

Gauge

Open Width

Length

Pin Diameter

Type

Material/Type

Hinge Leaf Material

Hinge Pin Material

LJH1066-S N/A 0.048 in N/A 1.25 in N/A 2.00 in N/A 0.125 in N/A D N/A Flag Type N/A Cold Rolled Steel N/A Steel
LJH1070-S N/A 0.048 in N/A 1.50 in N/A 2.00 in N/A 0.125 in N/A D N/A Flag Type N/A Cold Rolled Steel N/A Steel
LJH1078-S N/A 0.048 in N/A 2.00 in N/A 3.00 in N/A 0.125 in N/A D N/A Flag Type N/A Cold Rolled Steel N/A Steel
LJH1074-S N/A 0.048 in N/A 1.50 in N/A 2.50 in N/A 0.125 in N/A D N/A Flag Type N/A Cold Rolled Steel N/A Steel
LJH1042-S N/A 0.060 in N/A 1.00 in N/A 1.50 in N/A 0.125 in N/A D N/A Flag Type N/A Cold Rolled Steel N/A Steel
LJH1046-S N/A 0.060 in N/A 1.25 in N/A 2.00 in N/A 0.125 in N/A D N/A Flag Type N/A Cold Rolled Steel N/A Steel
LJH1050-S N/A 0.060 in N/A 1.50 in N/A 2.00 in N/A 0.125 in N/A D N/A Flag Type N/A Cold Rolled Steel N/A Steel
LJH1054-S N/A 0.060 in N/A 2.00 in N/A 2.00 in N/A 0.125 in N/A D N/A Flag Type N/A Cold Rolled Steel N/A Steel
LJH1058-S N/A 0.060 in N/A 2.00 in N/A 2.50 in N/A 0.125 in N/A D N/A Flag Type N/A Cold Rolled Steel N/A Steel
LJH1062-S N/A 0.060 in N/A 2.00 in N/A 3.00 in N/A 0.125 in N/A D N/A Flag Type N/A Cold Rolled Steel N/A Steel
LJH1026-S N/A 0.075 in N/A 1.50 in N/A 2.00 in N/A 0.125 in N/A D N/A Flag Type N/A Cold Rolled Steel N/A Steel
LJH1030-S N/A 0.075 in N/A 2.00 in N/A 2.50 in N/A 0.125 in N/A D N/A Flag Type N/A Cold Rolled Steel N/A Steel
LJH1034-S N/A 0.075 in N/A 2.00 in N/A 3.00 in N/A 0.187 in N/A D N/A Flag Type N/A Cold Rolled Steel N/A Steel
LJH1038-S N/A 0.075 in N/A 3.00 in N/A 4.00 in N/A 0.187 in N/A D N/A Flag Type N/A Cold Rolled Steel N/A Steel
LJH1009-S N/A 0.090 in N/A 2.00 in N/A 2.50 in N/A 0.187 in N/A D N/A Flag Type N/A Cold Rolled Steel N/A Steel
LJH1013-S N/A 0.090 in N/A 2.00 in N/A 3.00 in N/A 0.187 in N/A D N/A Flag Type N/A Cold Rolled Steel N/A Steel
LJH1017-S N/A 0.090 in N/A 3.00 in N/A 3.00 in N/A 0.250 in N/A D N/A Flag Type N/A Cold Rolled Steel N/A Steel
LJH1022-S N/A 0.090 in N/A 3.00 in N/A 4.00 in N/A 0.250 in N/A D N/A Flag Type N/A Cold Rolled Steel N/A Steel
LJH1001-S N/A 0.120 in N/A 3.00 in N/A 4.00 in N/A 0.250 in N/A D N/A Flag Type N/A Cold Rolled Steel N/A Steel
LJH1005-S N/A 0.120 in N/A 4.00 in N/A 4.00 in N/A 0.250 in N/A D N/A Flag Type N/A Cold Rolled Steel N/A Steel
1 - 20 of 20 | Results Per Page | View | Unit of Measure
1